Low/Reverse Clutch Frictions for GM TH350 TH350C 1969-1986, 24 Pack

Low/reverse clutch friction plates for GM Turbo-Hydramatic TH350 and TH350C automatic transmissions. This bulk package includes 24 friction plates for transmission rebuilding, repair inventory, and multi-unit service work.

Part Details

• Part type: Low/reverse clutch friction plates

• Transmission application: Compatible with GM TH350 and TH350C

• Additional transmission family references: TH250 and TH250C applications may use a similar low/reverse friction configuration; verify all measurements and transmission specifications before ordering

• Plate quantity: 24

• Thickness: Nominal 0.100 inch

• Internal tooth count: 25

• Package contents: Friction plates only

Fitment And Installation Guidance

These frictions install in the low/reverse clutch pack. Match the transmission model, clutch location, 25-tooth internal spline configuration, thickness, outside diameter, original stack-up, and required clutch clearance before installation.

Low/reverse clutch concerns can result from more than worn friction plates. During overhaul, inspect the clutch steels, pressure plate, snap ring, apply components, sealing rings, valve body condition, and related transmission components. Follow the correct service procedure and clearance specification for the exact transmission being rebuilt.

This is a 24-piece bulk package, not a complete transmission rebuild kit. It does not include clutch steels, seals, gaskets, filters, snap rings, or other transmission components unless separately specified.

Fluid Service

Refill with the vehicle manufacturer’s specified automatic transmission fluid. Lubegard ATF Protectant may be used during service only when compatible with the specific application and according to its product instructions.